AA 300 FAQs
The AA300 has a flight range of about 150 meters
The AA300 weighs 2.11 lbs.
The dimensions of the AA300 are 13.8 x 10.1 x 5.3 inches
The AA300 has 1 Lithium Polymer Battery
There is an average of 12 minute battery life on the AA300
It takes approximately 130-180 minutes to fully charge the AA300's battery
Yes, the AA300 includes a built-in HD 1080p camera
Yes! The AA300 is equipped with GPS signal to help you achieve and easy and stable flight. Watch this video to learn more about the AA300's GPS mode.
Follow Me Mode is a great GPS function that's included with the AA300. When this mode is enabled you will be able to walk around and your drone will follow that same path.
Gesture mode will disable the GPS function of the drone and put you in complete control of flying. Gesture mode is best for experienced pilots who don't need assitance from the GPS to have a stable flight. To see gesture mode in action, watch this video here.
The Return to home function helps you to safely land your drone. With just a push of a button, your drone will safely land in the same spot it took off. Return to Home will also be enabled if your drone is running low on battery or it loses its GPS signal. To learn more about Return to Home, watch this video here.
No. Please do not leave any charging batteries outside of your care and never leave them to charge overnight. Take a look at this video for more information.
Yes! Use the included smartphone attachment to use your smartphone for FPV viewing.
Make sure that you are outside and in and open space with a low amount of wind. Pair your remote according the the instructions and then compass calibrate the AA200 horizontally and then vertically. When the lights are no longer blinking, you are able to unlock the propellers and fly the drone.Watch this video for more information on callibrating your drone.
First, plug the battery into the AA300 and lock the battery into position with the twist lock feature. Once you hear the audible confirmation beeps, grab your controller for the next step. First, push the red button down on the top left side and then flip the on switch in the middle of your remote. You will hear one long beep and then two short beeps to confirm the AA300 and the remote are now paired. On your LCD Screen you will see bars indicating the connection status and the lights on your drone will be blinking alternatively from front to back. Watch this instructional video here.
Aircraft compass calibration should be done each time the battery has been removed and then reinserted into the drone. Take a look at this video to see how to compass calibration works.
It's best to avoid flying the AA300 in windy conditions.
Installing replacement propellers correclty is extremely important to safely continue to fly your AA300. Make sure to only replace one propeller at a time and to only replace "A" propellers with "A" replacement propeller and "B" propellers with "B" replacement propellers. For more help with propeller installation, please watch this video.
Make sure that you are outside and in and open space with a low amount of wind before you unlock your drone. First, be sure that your drone has the battery in and compass calibration has been completed and that your drone is paired with the remote. Next, to unlock the propellers, short-press the red button on the top right of your controller. Your drone is now ready for flight! Take a look at this video to see the process.
Yes the drone has a great one-touch take-off and landing button which means that your drone will easily take off and land at the touch of a button, which makes flying a lot easier. Watch this video of using the function here.